EDGES

STRAIGHT EDGE BEVEL EDGE
half the material thickness. Bevel edges are not available on 1/16″ thick material or any Stainless Steel.

MATERIALS

STAINLESS STEEL COMMERCIAL BRONZE
 Etched Stainless Steel Alloy
STAINLESS STEEL Alloy 304; Optional Alloy 319. Thicknesses include 1/16″, 1/8″, 3/16″ & 1/4″. COMMERCIAL BRONZE (90/10) Alloy C22000; 90% Copper, 10% Zinc. Thicknesses include 1/16″, 1/8″, 3/16″ & 1/4″.
NAVAL BRASS COPPER
NAVAL BRASS (60/39/1) Alloy C46500; 60% Copper, 39.25% Zinc, .75% Tin. Thicknesses include 1/16″, 1/8″, 3/16″ & 1/4″. COPPER Alloy C11000; Thicknesses include 1/16″, 1/8″, 3/16″ & 1/4″.

GRAPHICS

RECESSED GRAPHICS RAISED GRAPHICS

RAISED
GRAPHICS (optional) When raised text or graphics is specified, the
background will be painted, leaving the text or graphics in the alloy
color.
RECESSED GRAPHICS (standard) The standard on all Etched Plaques is recessed text and graphics that are paint filled.

MOUNTING METHODS

STUD MOUNT STUD BOSS MOUNT SCREW MOUNT
Stud Boss Mount
STUD MOUNT (blind mount) All plaques 1/4″ thick and thicker are drilled and tapped. 1/16″ & 1/8″
thick plaques have double face tape applied to the back. Tape is 3M
#4930 – 25 mil. Tape for use in most applications. You will need to
verify if this works for your applicatio
STUD BOSS MOUNT Stud bosses can be welded to the backs of 1/8″ & 3/16″ thick plaques. SCREW
MOUNT (flush mount) Holes are drilled through the surface of the
plaque. Specify screw size and if you need the holes to be countersunk.
1/16″ thick plaques cannot be countersunk and will include round head screws.