NJ - NY - PA - CT Email: sales@signsecrets.com Tel: 973-253-1333
On Site Free Estimates
Fully Insured Subcontracts Welcome.
Survey, Estimate and Install.
BEVEL EDGE (optional) An optional bevel (41°) edge is applied to one
half the material thickness. Bevel edges are not available on 1/16" thick material or any Stainless Steel.
STRAIGHT EDGE (standard) The standard edge on an etched plaque is a straight edge (90°)
COPPER Alloy C11000; Thicknesses include 1/16", 1/8", 3/16" & 1/4".
GRAPHICS
RECESSED GRAPHICS
RAISED GRAPHICS
RAISED
GRAPHICS (optional) When raised text or graphics is specified, the
background will be painted, leaving the text or graphics in the alloy
color.
RECESSED GRAPHICS (standard) The standard on all Etched Plaques is recessed text and graphics that are paint filled.
MOUNTING METHODS
STUD MOUNT
STUD BOSS MOUNT
SCREW MOUNT
STUD MOUNT (blind mount) All plaques 1/4" thick and thicker are drilled and tapped. 1/16" & 1/8"
thick plaques have double face tape applied to the back. Tape is 3M
#4930 - 25 mil. Tape for use in most applications. You will need to
verify if this works for your applicatio
STUD BOSS MOUNT Stud bosses can be welded to the backs of 1/8" & 3/16" thick plaques.
SCREW
MOUNT (flush mount) Holes are drilled through the surface of the
plaque. Specify screw size and if you need the holes to be countersunk.
1/16" thick plaques cannot be countersunk and will include round head screws.
Etched Style Plaques
