OUR PROPRIETARY BERN-LOK™ GREATLY REDUCES DETERIORATION AND DELAMINATION.
From in-store displays, to reception areas, to exhibits, your interior signage project will stand out with these elegant laminate display letters.
CHOICE OF LAMINATES AND SUBSTRATES
Choose from a variety of acrylic, metal and foil laminates on impact-modified acrylic or high density foam substrates, in multiple gauges.
We stand confidently behind the quality and craftsmanship of every piece we produce because we’ve tested it to last a lifetime, or we’ll replace it, free.
Larger sizes typically require larger letter thickness. Below are our standard sizes. Please contact us for larger sizes.
Aluminum: ⅛”–1″ deep, ½”–46″ high
Bronze: ⅛”–1/2″ deep, ½”–46″ high
Brass: ⅛”–3/4″ deep, ½”–46″ high
Copper: ⅛”–3/8″ deep, ½”–40″ high
Steel: ⅛”–1/2″ deep, ½”–46″ high
Polished Clear Anodized
Polished Gold Anodized
Medium Bronze Anodized
Pol Med Bronze Anodized
Dark Bronze Anodized
Polished Dark Bronze Anodized
Polished Black Anodized
Bronze, Brass and Copper Finishes
Polished & anodized finishes require a min. 2″ height and ¼” depth or 3″ height and ⅛” depth (stud mounts required). Restrictions may apply on letters over 24″. Actual color may vary from order to order due to the anodizing.All patinas, by their very nature, will vary form letter to letter and order to order. These finishes will change in appearance over time depending on contact with moisture and temperature. Patinas can “bleed” onto the installation surface when installed outside.
Standard Painted Colors
Marine Reef Blue
Letter backs of flat solid letters are drilled and tapped (1/4″ min. thickness) to receive threaded studs. Studs are pressed into pre-drilled wall holes and secured with adhesive and/or anchors – based on the wall type and letter weight. Studs can be aligned in-line for brick or block mortar upon request. Letters 1/8″ thick can have studs bosses welded (additional charge) to the to receive the stud. (view drawing)
Top Stud Mount
Letters 3/8″ and thicker can be drilled and tapped for a top stud installation. (view drawing)
Bottom Stud Mount
Letters 3/8″ and thicker can be drilled and tapped for a bottom stud installation. Letters with rounded bottoms (such as C,G,J,O,Q,S,U) can be sanded flat to properly align on a flat surface or rail. (view drawing)